Original and exclusive, this noise reducer is designed for HDR50 and HDP50 revolvers fitted with an M15x1 threaded barrel. Its 40 mm diameter keeps the top of the revolver's sight visible, so your aim isn't obstructed.
If you don't have the M15x1 threaded barrel, you can buy it in the shop ‼️ [Click here] ‼️
This moderator effectively reduces the noise of the gas at the barrel's exit. Let's be clear on this point: on all revolvers, most of the noise comes from the cylinder. This moderator therefore does its job perfectly on the exhaust gas only. 🔊 The noise reduction is real but partial, and it also clearly improves the look of your gun.
Our moderators are 3D printed in a high-grade technical filament, selected for its mechanical and thermal resistance (85-95 °C). Made in France, they are designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality.
Always shoot with a properly filled CO2 cartridge. Insufficient pressure reduces the projectile's speed and stability: it may then deviate from the barrel's axis and strike the inside of the moderator.
This is all the more important if you use heavier projectiles, which need more energy to be propelled correctly. A full cartridge is your guarantee that the projectile passes through the moderator without touching it.
Your moderator's thread has been carefully checked using a precision tap to guarantee optimal quality.
Always screw it on straight, without forcing: a correctly aligned moderator screws on with no resistance. If it resists, stop — that's a sign of poor concentricity. Unscrew it, realign the moderator with the barrel's axis and start again.
To make installation easier, apply a little oil to the thread.
This product can be sanded and painted for a cleaner look:
Designed and made in France using 3D printing, this sound reducer is an Invent3D exclusive. Design and production controlled in-house, for more comfortable shooting with your HDR50 or HDP50. 🇫🇷
Your sound reducer is shipped quickly and carefully packaged from France. 📦
This sound moderator is intended exclusively for category D CO₂ launchers and guns (energy ≤ 20 joules), on free sale for adults. It reduces noise at the barrel's exit for greater shooting comfort.
By design, this moderator is powerful enough to be technically compatible with upgraded guns exceeding 20 joules. However, such use is prohibited: it would result in reclassification to a higher category, making its use illegal without appropriate authorisation. This product is sold only for use on category D guns.
Reserved for recreational shooting on secure private property or at an approved shooting range. The buyer is solely responsible for the use they make of this product and must ensure they comply with the regulations in force.
Data sheet
