Projectiles

Subcategories

• HDR50

  Accessories and ammunition for Umarex T4E HDR50 and TR50 — .50 caliber

  In this category you'll find all the equipment dedicated to your Umarex T4E HDR50 and TR50 in .50 caliber: 8 mm slugs, 10 mm balls, customization accessories and equipment designed for these models. French design and manufacturing, simple installation without modification.

  What you'll find in this category

  • .50 caliber slugs with 8 mm diameter, for recreational shooting on private grounds
  • .50 caliber balls with 10 mm diameter
  • Customization accessories to upgrade your equipment
  • Equipment dedicated to Umarex T4E HDR50 and TR50

  Compatibility

  All of these products are designed for Umarex T4E HDR50 and TR50 launchers in .50 caliber. Each reference specifies its exact compatibility on its own product sheet: refer to the item details to check the suitability with your model and the intended use (8 mm slugs or 10 mm balls depending on the desired projectile).

  French design and manufacturing

  Invent3D accessories are designed and manufactured in France using 3D printing. This artisanal manufacturing makes it possible to offer parts truly adapted to the HDR50 and TR50, with simple installation that requires no modification of your equipment. You customize and upgrade your equipment while preserving its original integrity.

  Installation

  The accessories in this category are designed for direct installation, without specific tooling or transformation. Each product sheet details the installation steps specific to the item concerned. Refer to the dimensions and characteristics indicated on each reference for an optimal fit.

  Why choose Invent3D accessories for HDR50 / TR50

  • French manufacturing using 3D printing, artisanal quality
  • Simple installation, without modification of the weapon
  • Complete range dedicated to .50 caliber: 8 mm slugs, 10 mm balls, customization accessories
  • Products designed for recreational shooting on private grounds

  Delivery

  Your accessories and ammunition for HDR50 and TR50 are shipped with care 📦. The conditions and delivery times are specified at the time of order.

• HDS/TS68

  Accessories and ammunition for Umarex T4E HDS68 and TS68

  This category brings together all .68 caliber balls and customization accessories dedicated to the Umarex T4E HDS68 and TS68 launchers. Ammunition and equipment designed for the .68 caliber, designed and manufactured in France by Invent3D.

  Available .68 caliber balls

  Here you will find .68 caliber balls offered in several diameters, to adapt to your recreational shooting use and your preferences:

  • .68 caliber balls of 8 mm
  • .68 caliber balls of 10 mm
  • .68 caliber balls of 12 mm
  • .68 caliber balls of 13.5 mm

  Choosing the diameter allows you to adjust the behavior of the projectile according to your equipment and your shooting sessions on private grounds.

  Customization accessories

  Beyond the ammunition, this category brings together the customization accessories dedicated to the HDS68 and TS68. The objective: to allow you to upgrade and customize your equipment, a point that T4E enthusiasts particularly appreciate. Each piece is 3D printed and manufactured in France.

  Compatibility

  The balls and accessories in this category are dedicated to the following models:

  • Umarex T4E HDS68
  • Umarex T4E TS68

  Refer to each product sheet to find out the exact diameter, the contents of the batch and the precise compatibilities before ordering.

  French manufacturing

  All the ammunition and all the accessories in this range are designed and manufactured in France. The artisanal manufacturing using 3D printing guarantees products dedicated to the .68 caliber and designed for recreational shooting on category D launchers. You also benefit from a human and responsive after-sales service to assist you in your choice.

  Delivery

  Your balls and accessories for HDS68 and TS68 are shipped carefully packaged. Check each product sheet for details of the packaging and references.

• HDR68/TR68

  Accessories for HDR68 and TR68 .68 Caliber

  Customization and upgrade accessories for Umarex T4E HDR68 and TR68 launchers in .68 caliber. Parts designed and made in France for easy installation, with no permanent modification to your gun.

  Specifications

  • Accessories dedicated to the HDR68 and TR68
  • Caliber: .68
  • Customization and upgrade parts
  • Easy installation, no permanent modification
  • French design and manufacturing, 3D printed

  Why choose these accessories

  This range brings together the parts that let you customize and upgrade your HDR68 or TR68. Each accessory is designed for simple, reversible installation: you adapt your gun to your preferences without modifying it permanently. It's the direct way to get the most out of your launcher, whether you're looking to improve comfort, looks or functionality, according to your recreational shooting practice.

  Designed and 3D printed in France, these accessories reflect a careful, artisanal approach to manufacturing. You get parts designed specifically for your T4E launchers, where generic off-the-shelf accessories don't always fit perfectly. This control over the design ensures a precise fit for your model, from one accessory to the next and over time, so your setup stays consistent.

  Compatibility

  • Umarex T4E HDR68
  • Umarex T4E TR68

  These accessories are designed for the HDR68 and TR68 in .68 caliber. Please check which model each part fits before ordering, as compatibility can vary from one accessory to another. If you have any doubt about compatibility with your setup, our customer service is available to help you choose.

  Made in France

  Made in France using 3D printing, these accessories are part of our range dedicated to Umarex T4E launchers. Designed and produced in-house by Invent3D, to customize your gun with ease. 🇫🇷

  Shipping

  Your accessories are shipped quickly and carefully packaged. 📦

• HDP/TP50

  Accessories for HDP50 and TP50 .50 Caliber

  Customization and upgrade accessories for Umarex HDP50 and TP50 launchers in .50 caliber. Parts designed and made in France for easy installation, with no permanent modification to your gun.

  Specifications

  • Accessories dedicated to the HDP50 and TP50
  • Caliber: .50
  • Customization and upgrade parts
  • Easy installation, no permanent modification
  • French design and manufacturing, 3D printed

  Why choose these accessories

  This range brings together the parts that let you customize and upgrade your HDP50 or TP50. Each accessory is designed for simple, reversible installation: you adapt your gun to your preferences without modifying it permanently. It's the direct way to get the most out of your launcher, whether you're looking to improve comfort, looks or functionality, according to your recreational shooting practice.

  Designed and 3D printed in France, these accessories reflect a careful, artisanal approach to manufacturing. You get parts designed specifically for your HDP50 and TP50 launchers, where generic off-the-shelf accessories don't always fit perfectly. This control over the design ensures a precise fit for your model, from one accessory to the next and over time, so your setup stays consistent.

  Compatibility

  • Umarex HDP50
  • Umarex TP50 (generation 2)

  These accessories are designed for the HDP50 and TP50 in .50 caliber. Please check which model each part fits before ordering, as compatibility can vary from one accessory to another. If you have any doubt about compatibility with your setup, our customer service is available to help you choose.

  Made in France

  Made in France using 3D printing, these accessories are part of our range dedicated to Umarex launchers. Designed and produced in-house by Invent3D, to customize your gun with ease. 🇫🇷

  Shipping

  Your accessories are shipped quickly and carefully packaged. 📦

• TB68/TX68/TC68

  Accessories and Ammunition for Umarex T4E TB68, TX68 and TC68 (.68)

  All the equipment for your Umarex T4E TB68, TX68 and TC68 launchers in .68 caliber: direct-mount sound moderator, ammunition, CO2 capsules and maintenance accessories, all in one place.

  What you'll find in this range

  • Direct-mount sound moderator
  • .68 caliber ammunition
  • CO2 capsules
  • Maintenance accessories
  • Compatible with TB68, TX68 and TC68 (Umarex T4E)

  Why this range dedicated to the TB68 / TX68 / TC68

  These three Umarex T4E launchers in .68 caliber are powerful models that deserve suitable equipment. This range brings together everything you need in one place: ammunition and CO2 capsules to shoot, a direct-mount sound moderator for comfort when firing, and the maintenance accessories to keep your equipment in good condition. You'll find products designed for your launcher, without having to check compatibility elsewhere.

  The 3D-printed parts in this range are designed and made in France, with a careful, artisanal approach. The moderator in particular is designed specifically for category D air-powered guns: unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset.

  Compatibility

  • Umarex T4E TB68
  • Umarex T4E TX68
  • Umarex T4E TC68

  Please check which model each product fits before ordering. If you have any doubt about compatibility with your launcher, our customer service is available to help.

  Made in France

  The 3D-printed accessories in this range are made in France. Designed and produced in-house by Invent3D, to equip your Umarex T4E .68 caliber launchers. 🇫🇷

  Shipping

  Your products are shipped quickly and carefully packaged. 📦

• Impax P68

  Accessories for the Impax P68 .68 Caliber

  Customization and upgrade accessories for the T4E Impax P68 launcher in .68 caliber. Parts designed and made in France for easy installation, with no permanent modification to your gun.

  Specifications

  • Accessories dedicated to the Impax P68
  • Caliber: .68
  • Customization and upgrade parts
  • Easy installation, no permanent modification
  • French design and manufacturing, 3D printed

  Why choose these accessories

  This range brings together the parts that let you customize and upgrade your Impax P68. Each accessory is designed for simple, reversible installation: you adapt your gun to your preferences without modifying it permanently. It's the direct way to get the most out of your launcher, whether you're looking to improve comfort, looks or functionality, according to your recreational shooting practice.

  Designed and 3D printed in France, these accessories reflect a careful, artisanal approach to manufacturing. You get parts designed specifically for the Impax P68, where generic off-the-shelf accessories don't always fit perfectly. This control over the design ensures a precise fit for your model, from one accessory to the next and over time, so your setup stays consistent.

  Compatibility

  • T4E Impax P68

  These accessories are designed for the Impax P68 in .68 caliber. Please check which model each part fits before ordering, as compatibility can vary from one accessory to another. If you have any doubt about compatibility with your setup, our customer service is available to help you choose.

  Made in France

  Made in France using 3D printing, these accessories are part of our range dedicated to T4E launchers. Designed and produced in-house by Invent3D, to customize your gun with ease. 🇫🇷

  Shipping

  Your accessories are shipped quickly and carefully packaged. 📦