🔧 Threaded barrel for HDR50 / TR50 (Gen. 1 and 2) and PS-100 RAM. Internal diameter adjusted to 12.6 mm instead of 12.7 mm for more accuracy and power. Compatible with all slugs. 100% French manufacturing, an Invent3D exclusive. 🇫🇷
This threaded barrel for the HDR50 improves accuracy and power thanks to an internal diameter of 12.6 mm, slightly tighter than the original 12.7 mm, for better slug projection. An aluminium part, made in France, that fits in place of the original barrel and opens the way to installing a sound moderator thanks to its thread.
Tightening the internal diameter to 12.6 mm is not a trivial detail: by very slightly reducing the clearance around the projectile, the barrel improves the grip on the slug and optimises its projection on release. You gain in consistency and performance, while keeping compatibility with a wide range of ammunition. This barrel accepts all slugs as well as the majority of rubber balls, making it a versatile upgrade for your revolver.
In terms of compatibility, this barrel fits the HDR50 and TR50 generation 1 and 2, as well as the PS-100 RAM. It is not, however, compatible with the HDR50 L, the version fitted with an integrated laser. Please check your model carefully before ordering, and if in doubt, our customer service is available to help.
Fitting is accessible but requires care. Please note: the barrel is supplied without a spring, you must reuse the original one. Proceed as follows: 1. Remove all the screws from the HDR50. 2. Note the direction of the spring on the barrel (very important). 3. Remove the barrel and the spring. 4. Insert the spring onto your new barrel. 5. Take the opportunity to oil all the internal parts of your HDR50. 6. Reassemble and check, without a CO2 cartridge, that the cylinder turns freely without forcing.
Important: installing this barrel will void your warranty. Invent3D declines all responsibility in the event of misuse or incorrect installation of this product.
Made 100% in France, in aluminium, this threaded barrel is an Invent3D product. Design and production controlled in-house, to improve the accuracy and projection of your HDR50 or TR50. 🇫🇷
Your threaded barrel is shipped quickly and carefully packaged from France. 📦
Data sheet
Aucun avis pour le moment. Soyez le premier à donner votre avis !
🔧 Threaded barrel for HDR50 / TR50 (Gen. 1 and 2) and PS-100 RAM. Internal diameter adjusted to 12.6 mm instead of 12.7 mm for more accuracy and power. Compatible with all slugs. 100% French manufacturing, an Invent3D exclusive. 🇫🇷
