Top contributeurs
-
#1M
-
#2G
-
#3D
-
#4F
-
#5N
Modérateurs CO2
Sound Moderators for CO2 Guns — Made in France
Sound moderators designed to mount directly onto the original thread of your CO2 replica. A ready-to-use solution to reduce firing noise, with no machining or complex adaptation, on the main CO2 replicas on the market.
Specifications
- Direct mounting on the replica's original thread
- Muzzle noise reduction
- Category D — intended for recreational shooting
- French design and manufacturing, 3D printed
- Artisanal manufacturing, Invent3D exclusive
Why choose an Invent3D moderator
This range brings together the sound moderators that mount directly onto the original thread of your CO2 replica, to reduce firing noise and add comfort to your recreational shooting sessions. It's a simple way to customize and upgrade your equipment, with a suppressor designed to fit directly onto the existing thread, with no machining or complex adaptation required.
Each moderator is 3D printed and made in France, an artisanal approach that allows careful work and accessories designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality.
Compatibility
- HDR50
- HDP50
- Canik SFX Rival
- Artemis CP2
- HDX68 / HDB68 / TB68
- And other models with the same type of thread
Before ordering, check your replica's thread in order to select the right moderator. For any doubt about the compatibility of a model not listed, our customer service is available to help.
Installation
Installation is immediate: the moderator screws directly onto the replica's original thread, with no tools or special work. Screw the accessory on by hand until it stops, then check that it is properly tightened before use.
Made in France
Designed and made in France using 3D printing, these moderators are an Invent3D exclusive. Designed and produced in-house, for accessories dedicated to recreational shooting with your CO2 replicas. 🇫🇷
Shipping
Your sound moderators are shipped quickly and carefully packaged from France. 📦
Subcategories
-
HDR/HDP
M15x1 Moderator System for HDR50 and HDP50 Umarex
Fit your Umarex HDR50 or HDP50 with a high-performing sound moderator. Our M15x1-thread suppressors are designed to work with our Invent3D barrels, turning your T4E replica into a more discreet and accurate gun. A complete range, from the threaded barrel to the moderator.
The Invent3D system for HDR/HDP
The Umarex T4E replicas (HDR50, HDP50) do not come with a thread for a moderator as standard. Our complete solution includes:
- Barrel with M15x1 thread: replaces the original barrel
- M15x1 sound moderator: screws directly onto the barrel
This combination gives you more discreet shooting and better accuracy thanks to the extended barrel.
Our M15x1 range
- Mamba HDR/HDP: our flagship suppressor, compact and effective design
- Barrel + Suppressor pack: complete, ready-to-use solution
- Barrel extension: improves accuracy without a moderator
- M15x1 thread protector: protects the thread when the suppressor is not fitted
Why fit your HDR50 with a suppressor
The HDR50 and HDP50 are powerful replicas that generate a significant report. Adding a Mamba sound moderator lets you reduce noise for more discreet use, improve the looks with a tactical appearance, and gain accuracy thanks to the extended barrel. It's the direct way to upgrade your replica to suit your recreational shooting.
Our moderators are 3D printed and made in France, designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality.
Compatibility
- HDR50: T4E revolver, .50 caliber
- HDP50: T4E pistol, .50 caliber
- TR50: tactical revolver version
Important: our M15x1 moderators require the prior installation of an Invent3D threaded barrel. See our complete packs for a turnkey solution. If in doubt, our customer service is available to help.
Made in France
Designed and made in France using 3D printing, our M15x1 moderators are an Invent3D exclusive. Designed and produced in-house, to turn your HDR50 or HDP50 into a more discreet and accurate gun. 🇫🇷
Shipping
Your products are shipped quickly and carefully packaged from France. 📦
-
HDB68
.68 Caliber Sound Moderators for HDX68, HDB68 and TB68
3D-printed sound moderators for Umarex .68 caliber replicas HDX68, HDB68 and TB68. Designed to reduce muzzle noise on these powerful replicas during recreational shooting.
Specifications
- Caliber: .68
- Compatible with HDX68, HDB68 and TB68 (Umarex)
- Muzzle noise reduction
- Designed for powerful .68 caliber replicas
- French-made, 3D printed
Why choose these sound moderators
These moderators are designed for the most powerful .68 caliber replicas: HDX68, HDB68 and TB68. Fitted at the muzzle, they reduce noise when firing for greater comfort during your recreational shooting sessions. It's the direct accessory to make your sessions more pleasant, without changing anything about your replica's performance.
Designed and 3D printed in France, these moderators reflect a careful, artisanal approach to manufacturing. They are designed and made specifically for category D air-powered guns: unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset. A mark of compliance as much as a sign of quality.
Compatibility
- Umarex HDX68
- Umarex HDB68
- Umarex TB68
Please check the model and thread matching your replica before ordering. If you have any doubt about compatibility with your setup, our customer service is available to help.
Made in France
Made in France using 3D printing, these moderators are part of our .68 caliber range. Designed and produced in-house by Invent3D, for an accessory dedicated to recreational shooting with your Umarex replicas. 🇫🇷
Shipping
Your sound moderators are shipped quickly and carefully packaged. 📦
-
M17x1 - HDR50 et TR50...
M17x1 Moderators for HDR50 and TR50 with an X-Tender Kit
Sound moderators and adapters with an M17x1 thread, designed specifically for HDR50 and TR50 launchers fitted with an X-Tender kit. This kit uses an M17x1 thread, different from the M15x1 of our barrels: this range provides the solutions dedicated to that setup.
Our M17x1 products
- Mamba HDR/TR50 X-Tender: direct-mount suppressor for the X-Tender
- M17x1 to 1/2 UNF adapter: lets you use universal suppressors
- Thread: M17x1 (X-Tender compatible)
- French-made, 3D printed
The M17x1 thread: X-Tender compatible
The X-Tender kit for the HDR50 and TR50 is a popular barrel extension that uses an M17x1 thread. This thread is different from the M15x1 of our barrels, which calls for dedicated products. This range therefore brings together the moderators and adapters designed specifically for this setup: the Mamba HDR/TR50 X-Tender mounts directly on the X-Tender, and the M17x1 to 1/2 UNF adapter lets you use universal suppressors.
Designed and 3D printed in France, these products reflect a careful, artisanal approach to manufacturing. The moderators are designed and made specifically for category D air-powered guns: unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset.
What's the difference with the M15x1?
The M17x1 thread (17 mm diameter) is slightly larger than the M15x1 (15 mm). These two threads are not interchangeable: it's essential to check your setup before ordering.
- Invent3D barrel → M15x1 thread
- X-Tender kit → M17x1 thread
Compatibility
- HDR50 fitted with the X-Tender kit
- TR50 fitted with the X-Tender kit
- Any barrel or extension with an M17x1 thread
Please make sure your setup is M17x1 before ordering. If in doubt, our customer service is available to help.
Made in France
Made in France using 3D printing, these products are part of our range dedicated to the HDR50 and TR50. Designed and produced in-house by Invent3D, for setups fitted with an X-Tender kit. 🇫🇷
Shipping
Your products are shipped quickly and carefully packaged. 📦
-
Canik SFX Rival
Sound Moderators for the Canik SFX Rival
3D-printed sound moderators for the Canik SFX Rival, designed to fit this well-known CO2 pistol perfectly. They screw directly onto the threaded barrel, for more discreet shooting and an assertive tactical look.
Specifications
- For the Canik SFX Rival CO2 pistol
- Direct mounting on the threaded barrel
- Simple installation, no tools or modification
- More discreet shooting and a tactical look
- French-made, 3D printed
Why choose these sound moderators
The Canik SFX Rival is a quality CO2 replica, valued for its finish and realism. Its threaded barrel lets you install a sound moderator to improve the shooting experience: a suppressor adds a professional tactical look and better balance, which helps stabilize your shooting. It's the direct accessory to customize your pistol while gaining comfort.
Designed and 3D printed in France, these moderators reflect a careful, artisanal approach to manufacturing. They are designed and made specifically for category D air-powered guns: unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset. A mark of compliance as much as a sign of quality.
Installation
Our moderators screw directly onto the thread of the Canik SFX Rival. Installation is simple, with no tools or modification to your pistol: you screw on the moderator and you're ready to shoot.
Compatibility
- Canik SFX Rival (CO2 pistol, threaded barrel)
These moderators are designed for the thread of the Canik SFX Rival. Please check that your pistol matches this model before ordering. If you have any doubt about compatibility with your setup, our customer service is available to help.
Made in France
Made in France using 3D printing, these moderators are part of our range dedicated to CO2 pistols. Designed and produced in-house by Invent3D, for an accessory suited to your Canik SFX Rival. 🇫🇷
Shipping
Your sound moderators are shipped quickly and carefully packaged. 📦
