Unique model 🇫🇷 Made in France 🇫🇷
5 projectiles with 12mm Steel tip for replica / Alarm gun adapter. Red color.
The rubber striking tip is not included.
It is strictly forbidden to aim at a person or an animal. This is not a defense projectile, but a recreational one for shooting ranges or private property.
Any misuse of this product is your sole responsibility.

Pack of 5 red 18 mm PAK slugs, fitted with a 12 mm steel ball for better accuracy. Designed for PAK blank-firing guns fitted with an adapter for 18 mm rubber balls, for recreational target shooting. A unique model, created and made in France.
Fitted with a 12 mm steel ball, these slugs offer better accuracy and a total weight of over 11 g, compared to 4 g for the original rubber balls. This higher mass brings a more pronounced impact on target during your recreational shooting sessions. A unique model designed and made in France using 3D printing, with a careful, artisanal approach to manufacturing.
These slugs have been tested on SAPL-brand adapters, but also suit PAK adapters for 18 mm rubber balls. The adapter is not included. Please note: some self-gomme adapters fire 20 mm balls and will not be compatible (available in another listing).
Please check the internal diameter of your adapter carefully before ordering. If in doubt, our customer service is available to help.
Created and made in France using 3D printing, these slugs are a unique Invent3D model. Designed and produced in-house, for projectiles dedicated to recreational shooting with your blank-firing gun fitted with an adapter. 🇫🇷
Discreet shipping in a bubble envelope, by priority mail with tracking. 📦
See these slugs in action: watch the video.
PRECAUTIONS FOR USE:
IMPORTANT (please read):
There are several brands of 18 mm adapters. All slugs are tested on SAPL adapters with a 17.85 mm diameter; depending on the machining, the slugs may resist a little, or not hold perfectly if you aim downwards. For other brands with a larger diameter, the slugs will fit perfectly, but they may not stay in the adapter if you tilt the gun downwards.
Please check the internal diameter of your adapter carefully: the slugs are neither returnable nor exchangeable. Depending on the adapter's manufacturing batches, there may be slight differences in diameter. A difference of just 0.01 mm is enough — smaller for the round to resist a little, larger for it not to hold in the adapter.
If the Patriot slug doesn't fit (generic adapter or a brand other than SAPL): the problem will be at the base of the slug. Take some sandpaper and sand the base, on the widest part.
In all cases, note that the slug must not resist too much when entering the adapter. If it's slight, you can force it in, then remove it by disassembling your adapter and pushing with an Allen key, for example: the slug is designed to adapt. Generally everything is fine, but you buy with full knowledge of this.
By placing an order for this product, you certify that you are over 18 years old. Any misuse of this product is your sole responsibility.
These projectiles (plastic slug with steel ball) are intended exclusively for recreational target shooting. Their purchase is unrestricted for any adult; their use is strictly regulated and is the responsibility of the user.
Conditions of use:
Safety instructions:
By purchasing this product, you acknowledge that you have read these conditions and undertake to comply with them. Any non-compliant use is your sole responsibility.
Stay careful, be responsible. For any questions, contact us directly.
Data sheet