Modérateur PCP

Subcategories

• M10x1

  M10x1 Sound Moderators for Artemis CP2 and ISSC M22 Gen 2 Pistols

  Range of sound moderators with an M10x1 thread, designed for the Artemis CP2 and ISSC M22 Gen 2 pistols. These compact CO2/PCP pistols deserve a suppressor to match, for more discreet shooting during your recreational sessions.

  The M10x1 thread

  The M10x1 thread (10 mm diameter, 1 mm pitch) is used on certain compact pistols. This small format requires specific moderators or adapters.

  Our M10x1 solutions

  • Direct-mount Ø30 mm moderator: compact suppressor suited to pistols
  • M10x1 to 1/2 UNF adapter: lets you mount universal suppressors

  Why fit a suppressor on a pistol

  Even on a CO2 pistol, a sound moderator brings notable benefits: noise reduction for more discreet shooting on secure private property, a tactical look with a professional appearance, and better balance, as the weight at the end of the barrel helps stabilize your shooting. Our compact Ø30 mm moderators are perfectly proportioned for pistols, without unbalancing the gun.

  Our moderators are 3D printed and made in France, designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality.

  Compatible pistols

  • Artemis CP2: CO2 pistol convertible to a rifle
  • ISSC M22 Gen 2: CO2 replica
  • Any pistol fitted with an M10x1 thread

  Please check that your pistol is fitted with an M10x1 thread before ordering. If you have any doubt about compatibility with your model, our customer service is available to help.

  Made in France

  Designed and made in France using 3D printing, these M10x1 moderators are an Invent3D exclusive. Designed and produced in-house, for an accessory dedicated to your compact pistol. 🇫🇷

  Shipping

  Your sound moderators are shipped quickly and carefully packaged from France. 📦

• 1/2 20 UNF

  Sound Moderators for PCP Rifles — 1/2x20 UNF Thread

  Sound moderators designed to significantly reduce the noise of your PCP rifle, during your recreational shooting sessions on secure private property. The 1/2x20 UNF thread is the standard for PCP rifles: check below whether your gun is compatible.

  Which model to choose

  • Mamba Ø40 mm: the most versatile, suits the majority of uses
  • Standard Ø35 mm: for those who want maximum performance
  • Compact Ø30 mm: discreet and lightweight, ideal for mobile use
  • Flash hider 77 mm: protects your thread when you're not using a moderator

  Why choose an Invent3D moderator

  These moderators significantly reduce the noise of your PCP rifle when firing, for greater comfort and more discreet sessions on secure private property. Depending on the model chosen, you can favor versatility (Mamba Ø40 mm), maximum performance (Standard Ø35 mm) or discretion and lightness (Compact Ø30 mm). As the 1/2x20 UNF thread is the standard for PCP rifles, these suppressors mount directly onto most models on the market.

  Our moderators are 3D printed and made in France, designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality. Available in 4.5 mm, 5.5 mm, 6.35 mm, 7.62 mm and 9 mm calibers.

  Compatible rifles

  • Aselkon: MX5, MX6, MX8, MX9 Sniper, MX10, MX10S, RX6 Ravello
  • BSA: Scorpion, Brigadier
  • FX Airguns: Wildcat MKIII
  • Hatsan: AT44W-10, AT44S-10, AT44-10-Tact, BT 65, Flashpup S, Factor, Galatian II, NovaStar
  • Kral: Breaker, NP-01, NP-02, Puncher Ekinoks/Knight/Jumbo Dazzle/S/Wood
  • Reximex: Pretensis Daystar, Throne Gen 2, Zone
  • Snowpeak: Regulated, AP 1000
  • Stoeger: XM1 Bullpup
  • Trimex Arms: ELF-S Bullpup, Tacto-S
  • Umarex: 850 M2, UX Iconix
  • Walther: 1250 Dominator, Reign M2/M2 L, Rotex RM8/Varmint/Varmint UC
  • Others: Beretta Cx4 Storm, Crosman Prospect, Legends Cowboy Rifle Renegade

  ⚠️ Hatsan "QE" = M27x1 thread → see our dedicated category. Your rifle isn't listed? Contact us with the exact model, and our customer service will be available to help.

  Made in France

  Designed and made in France using 3D printing, these moderators are an Invent3D exclusive. Designed and produced in-house, for more comfortable and discreet shooting with your PCP rifle. 🇫🇷

  Shipping

  Your sound moderators are shipped quickly and carefully packaged from France. 📦

• Kral

  Sound Moderators for Kral and Crosman PCP Rifles

  Sound moderators for Kral and Crosman rifles. These brands use a specific proprietary thread, incompatible with the 1/2 UNF standard. We offer direct solutions and adapters to equip your gun and gain discretion during your recreational shooting sessions.

  A common thread for Kral and Crosman

  The Kral Puncher rifles and the Crosman Armada/Marauder share the same proprietary thread. This technical choice by the manufacturers requires specific accessories, which is why we have developed a dedicated range.

  Our solutions for Kral and Armada

  • Mamba Kral/Armada: direct-mount moderator, immediate fitting with no adapter
  • Standard Ø35 mm moderator: 17 cm long, excellent value for money
  • Adapter to 1/2 UNF: opens access to the entire range of universal suppressors
  • Kral flash hider: elegant thread protection when the moderator is not fitted

  Why choose an Invent3D moderator

  Kral rifles are known for their excellent value for money and their power. Our Mamba suppressor significantly reduces firing noise, allowing discreet use on secure private property. The design of our moderators respects the gun's balance thanks to their light weight (around 80 g), so as not to weigh down your setup. It's the direct way to gain shooting comfort on these powerful rifles.

  Our moderators are 3D printed and made in France, designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality. All our moderators for Kral are available in 4.5 mm, 5.5 mm and 6.35 mm calibers.

  Compatible rifles

  • Kral Puncher: Armour, Silent, Breaker, Mega, Maxi, Knight, Jumbo
  • Crosman Benjamin: Armada, Marauder (rifle), Akela, Fortitude

  Please check your rifle's thread and caliber before ordering. If you have any doubt about compatibility with your model, our customer service is available to help.

  Made in France

  Designed and made in France using 3D printing, these moderators are an Invent3D exclusive. Designed and produced in-house, for more comfortable and discreet shooting with your Kral or Crosman rifle. 🇫🇷

  Shipping

  Your sound moderators are shipped quickly and carefully packaged from France. 📦

• M27x1 Hatsan

  M27x1 Sound Moderators for Hatsan PCP Rifles

  Range of sound moderators with an M27x1 thread, specially designed for Hatsan PCP rifles. This specific metric thread equips the entire Hatsan range, from bullpups to classic rifles, for more discreet shooting during your recreational sessions.

  The M27x1 thread: specific to Hatsan rifles

  Hatsan uses a proprietary M27x1 thread (27 mm diameter, 1 mm pitch) on all its PCP rifles. This thread is not compatible with the 1/2 UNF standard, which is why it's important to choose a suitable moderator or use our adapter.

  Our solutions for Hatsan

  • Mamba M27x1: direct-mount suppressor, no adapter required
  • M27x1 to 1/2 UNF adapter: lets you use any 1/2 UNF suppressor

  Why choose Invent3D for your Hatsan

  Hatsan rifles are renowned for their power, which generates a substantial noise level. Our Mamba sound moderators, with their generous 40 mm diameter and optimized baffle system, offer significant noise reduction, even on the most powerful models such as the Hercule or the Blitz. It's the direct way to gain shooting comfort on these rifles.

  Our moderators are 3D printed and made in France, designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality.

  Compatible Hatsan rifles

  • Bullpups: Bullmaster, Bullmaster QE, Flashpup
  • Semi-auto: Blitz, Blitz FDE, Blitz 777, Barrage
  • Large calibers: Hercule, Hercule QE, Piledriver
  • Classics: Factor, Factor QE, Galaxian, Gladius, Invader
  • Compacts: NovaStar, Jet I & II

  Note: Hatsan's "QE" (Quiet Energy) models are fitted with an integrated moderator, but you can add one of our suppressors for even greater noise reduction. If you have any doubt about compatibility with your model, our customer service is available to help.

  Made in France

  Designed and made in France using 3D printing, these M27x1 moderators are an Invent3D exclusive. Designed and produced in-house, for more comfortable and discreet shooting with your Hatsan rifle. 🇫🇷

  Shipping

  Your sound moderators are shipped quickly and carefully packaged from France. 📦

• PP750 Artemis / Zasdar

  Sound Moderator for Artemis PP750 / Zasdar PCP Pistol

  3D-printed sound moderator for the Artemis PP750 PCP pistol (also sold under the Zasdar brand). Direct mounting on the original thread, with no adapter, to reduce firing noise on this compact and powerful pistol.

  Specifications

  • For Artemis PP750 / Zasdar PCP pistol
  • Direct mounting on the original thread
  • No adapter required
  • Muzzle noise reduction
  • French-made, 3D printed

  Why choose this sound moderator

  The Artemis PP750 (also sold under the Zasdar brand) is a compact, powerful PCP pistol that deserves a suppressor worthy of its performance. This moderator screws directly onto the original thread, with no adapter: installation is immediate, and you reduce firing noise for greater comfort during your recreational shooting sessions.

  Designed and 3D printed in France, this moderator reflects a careful, artisanal approach to manufacturing. It is designed and made specifically for category D air-powered guns: unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset. A mark of compliance as much as a sign of quality.

  Compatibility

  • Artemis PP750 (PCP)
  • Zasdar PP750 (same pistol under a different brand)

  This moderator is designed for the original thread of the PP750. Please check that your pistol matches this model before ordering. If you have any doubt about compatibility with your setup, our customer service is available to help.

  Made in France

  Made in France using 3D printing, this moderator is part of our range dedicated to PCP rifles and pistols. Designed and produced in-house by Invent3D, for an accessory suited to your Artemis PP750. 🇫🇷

  Shipping

  Your sound moderator is shipped quickly and carefully packaged. 📦

• Snowpeak T-REX

  Snowpeak T-Rex Accessories — Moderators, Adapters and Magazines

  Range of 3D-printed accessories for the Snowpeak T-Rex PCP rifle: original moderator replacement, adapters for universal suppressors, thread protectors and magazines. Everything to optimize and customize your T-Rex.

  Our T-Rex range

  • Suppressor + adapter pack: complete solution to replace the original moderator
  • M12 to 1/2 UNF adapter: to mount a universal suppressor
  • Thread protector: protects the thread after removal
  • Barrel cap: clean finish without a moderator
  • Single-shot magazine: a handy accessory for the T-Rex

  Why this range dedicated to the Snowpeak T-Rex

  This range brings together everything you need to optimize and customize your Snowpeak T-Rex PCP rifle. You can replace the original moderator with a dedicated model, mount a universal suppressor using the M12 to 1/2 UNF adapter, protect your thread after removal with a cap, or add a single-shot magazine. Each part meets a specific T-Rex need, with no need to look for compatibility elsewhere.

  The accessories in this range are designed and 3D printed in France, with a careful, artisanal approach. The moderators are designed and made specifically for category D air-powered guns: unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset. A mark of compliance as much as a sign of quality.

  Compatibility

  • Snowpeak T-Rex PCP rifle
  • M12 to 1/2 UNF adapter for universal suppressors

  Please check which model each accessory fits before ordering. If you have any doubt about compatibility with your setup, our customer service is available to help.

  Made in France

  Made in France using 3D printing, these accessories are part of our range dedicated to the Snowpeak T-Rex. Designed and produced in-house by Invent3D, to optimize your PCP rifle. 🇫🇷

  Shipping

  Your accessories are shipped quickly and carefully packaged. 📦

• Snowpeak T-Rex Bullpop

  Accessories for the Snowpeak T-Rex Bullpup

  3D-printed sound moderators and accessories for the Snowpeak T-Rex Bullpup. Parts designed specifically for the Bullpup version and its compact architecture, with direct mounting on the original thread, no adapter required.

  What you'll find in this range

  • Direct-mount sound moderators
  • Accessories dedicated to the Bullpup version
  • Mounting on the original thread, no adapter
  • Parts designed for the Bullpup's compact architecture
  • French design and manufacturing, 3D printed

  Why this range dedicated to the T-Rex Bullpup

  This range brings together parts designed specifically for the Snowpeak T-Rex Bullpup. Their design takes into account the compact architecture unique to this version, where a generic accessory doesn't always fit. The sound moderator in particular screws directly onto the original thread with no adapter, to effectively reduce the sound signature when firing and add comfort to your recreational shooting sessions.

  The parts in this range are designed and 3D printed in France, with a careful, artisanal approach. The moderators are designed and made specifically for category D air-powered guns (under 20 joules): unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset.

  Compatibility

  • Snowpeak T-Rex Bullpup (original thread)

  These accessories are designed for the Bullpup version of the T-Rex. Please check that your rifle matches this model before ordering. If you have any doubt about compatibility with your setup, our customer service is available to help.

  Made in France

  Made in France using 3D printing, these accessories are part of our range dedicated to the Snowpeak T-Rex. Designed and produced in-house by Invent3D, to equip your Bullpup version. 🇫🇷

  Shipping

  Your accessories are shipped quickly and carefully packaged. 📦

• Modérateur...

  Customizable Sound Moderators — Made to Order

  Can't find the sound moderator suited to your setup? Discover our customizable suppressor service, made to order according to your specifications. Thanks to our mastery of 3D printing, we adapt our moderators to your needs, for even the most unusual configurations.

  Our customization service

  We can adapt our moderators to your specific needs:

  • Custom thread: any diameter and thread pitch
  • Specific caliber: from 4.5 mm to 9 mm
  • Adapted dimensions: length and diameter to suit your needs

  How to order

  • Contact us with your specifications
  • We assess feasibility and send you a quote
  • After approval, manufacturing within 5-7 days
  • Shipping of your unique moderator

  For which guns

  • PCP rifles with unusual threads
  • CO2 and PCP pistols
  • Airsoft replicas
  • Special configurations (large calibers, rare threads…)

  Why choose Invent3D

  With our experience in 3D design and airguns, we master the creation of effective moderators for all configurations. Made in France, our custom suppressors benefit from the same quality as our standard range. It's the direct solution when a standard model doesn't fit your gun or your project.

  Our moderators are 3D printed and designed specifically for category D air-powered guns. Unlike a firearm moderator, whose use on these guns is prohibited, the Invent3D moderator is designed for this purpose from the outset: a mark of compliance as much as a sign of quality. Contact us to discuss your project.

  Made in France

  Designed and made in France using 3D printing, our custom moderators are an Invent3D exclusive. Designed and produced in-house, for a unique suppressor suited to your setup. 🇫🇷

  Shipping

  Your custom moderator is shipped quickly and carefully packaged. 📦